Dust Collector
Mobile air pulse type dust collector
(AAM-SERIES)
This product is suitable for general purpose dusting that requires movement, with uneven upspace.
-
Automatic filter cleaning(AIR PULSE JET)
The dust attached to the filter is sprayed on compressed air stored in the air tank for a certain time to clean the filter. Manual automatic operation is possible, and filter cleaning is possible during operation.
-
FLEXIBLE ARM
The flexible arm is equipped with a flexible arm that can be moved and fixed in the desired workspace, making it suitable for fluid use. Changeable length 2m/3m
-
Cellulose filter
Basic Specifications - Process CELLULOSE softener in cartridge form to increase filtration area and increase capture efficiency. Filter application of various aftershocks (TEFLON, NANO, NOMEX, etc.)
-
TURBO FAN MOUNTING
1. Easy to disassemble/assemble, easy to maintain and operate 24 hours a day
2. High efficiency and premium motors are applied to reduce operating costs relative to long-term operating hours (for 3-phase motors)
3. low noise· low vibration· Extend motor life due to low temperature increase
-
Options
Filter differential pressure instrumentation (differential pressure gauge) - to display the time of derailment and replacement (analog/digital)
-
Precautions
1. Compressor air is required by using compressed air to escape.
2. Not suitable for high-oil dust work.
Movable backfilter collector(ABM-SERIES)
This product is suitable for general purpose dusting that requires movement with uneven working space..
-
FLEXIBLE ARM
The flexible arm allows for free movement, allowing movement and fixation in the desired workspace, making it suitable for fluid use. Changeable length 2m/3m>br />※ ABM-010 applies 1125 refractive hose 1.5m.
-
Bag filter
Applying a pocket-type filter with a square plane minimizes the cohesion of the filter surface, increasing the efficiency of the removal of the filter, and surface coating of the filter is possible according to the characteristics of the source of contamination (discharge and water generation, 3D polyx, etc.) The filter is a simple one-on-one structure that is easy to replace by top-to-bottom removal method.
-
Filter cleaning(SHAKING)
Manual Tali method (basic type): Shake the side de-vibration rod to dislodge the dust by vibration.
-
TURBO FAN Mounting
1. Easy to disassemble/assemble, easy to maintain and operate 24 hours a day
2. High efficiency and premium motors are applied to reduce operating costs relative to long-term operating hours (for 3-phase motors)
3. low noise· low vibration· Extend motor life due to low temperature increase
-
Options
1. Filter differential pressure instrumentation (differential pressure gauge) - to display the time of derailment and replacement (analog/digital)
Postprocessing filter (HEPA filter) mountable
-
Precautions
Not suitable for high-oil dust work.
Mobile welding fume dust collector
(AHM-SERIES)
This product is suitable for general purpose dusting that requires movement, with uneven workspace.
-
Three-stage filter
1. Primary AL.DEMISTER Filter (WASHABLE) - Collecting flame particles to prevent fire hazards
2. Secondary CARBON MAT Filter - Remove odors, organic solvents and gases using adsorption of activated carbon
3. 3rd HEPA Filter - Capture 99.7% or more dust of particles greater than 0.3μ
-
FLEXIBLE ARM
유It has flexible arms that can be moved and fixed to the desired workspace, making it easy to use in a flexible manner. Changeable length 2m/3m
-
TURBO FAN Mounting
1. Easy to disassemble/assemble, easy to maintain and operate 24 hours a day
2. High efficiency and premium motors are applied to reduce operating costs relative to long-term operating hours (for 3-phase motors)
3. low noise· low vibration· Extend motor life due to low temperature increase
-
Options
1. Measuring the differential pressure of the filter (differential pressure gauge) - indicating the timing of the derailment and exchange (analog/digital)
2. Postprocessing filter (HEPA filter) available
-
Precautions
1. Not suitable for high temperatures and large amounts of flame.
2. Pre-treatment devices are required when working with large amounts of dust.
Small dust collector (ASD / ASH)
Low-noise small product that removes dust and fume for soldering (electricity, electronic components) and micro dust (other than pharmacy and laser marking).
-
Basic A-type refractive hose application
-
Options
1. AFTER FILTER Apply (Active Coal & Hepa Filter) to collect and remove odors and dust with a diameter of 0.3m.
2. Can be made for two persons (two intake points)
3. Multi-joint hose attachable (black hose)
-
Precautions
It is not suitable for dusting with large amounts of water.